Transparent Solar Panel Glass From Professional Manufacturer
3.2mm Anti-Reflection Glass At Good Price, combined with nanometer anti-reflective coating technology,increase solar transmittance by way of decreasing light reflectance and improve the solar cell phtotelectric conversion efficiency.Meanwhile,it reduces the reflected glare of the glass and the pollution caused by the reflectance to the environment. The hydrophobic behavior of the AR coating could in some degree protect the dust and dirt from shading the light and improve the cleaning performance of the glass. With the outstanding characteristics of the high solar lights transmittance, the low reflectance, the low iron, the high mechanical strenght and the high flatness, it is one of the indispensable important parts of solar cell and has been widely used to photovoltaic power generation all over the world.
|Products||3.2mm Anti-Reflection Glass At Good Price|
|Size||Can be customized,maximum size:1200*2200mm|
|Solar transmittance||3.2mm>93.5%,with AR coating|
|Applications||For solar cell module|
|Delivery||Within 15 days after receiving the deposit|
1.High solar lights transmittance
2.The low reflectance: visible light reflectance is less than 7.30%
3.Low iron:glass has only 0.012% of iron content;
4.High intensity,the strength is 3-5 times of ordinary annealed glass
5.Wind pressure resistance: the wind pressure resistance is 1.5-3 times of ordinary annealed glass;
6.Heat shock resistance: the heat shock resistance is 3 times of ordinary annealed glass;
7.Safety:if it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury.
2.Edging and Cleaning
|1||Appearance||EN1096-2||Surface is clean, no scratches,spots or pinhole||Qualified|
|2||Light transmittance||ISO 9050||The ratio after coating is higher than before >2.5||>2.6|
|3||Adhesion||ASTMD3359||The cutting edge is very smooth , no grid slide,||0 level|
|4||Pencil hardness||ASTMD3363||No thickness of film which scratched by pencil more than 3mm||≥6H|
|5||Salt spray test||EN1096-2||With 5%(±1)NaC1,under 35ºC,last 4-9days,record the data before and after the test, T<1.0||4 days, T=0.57 9 days, T=0.91|
|6||Thermal Cycle||IEC61215/10||Keep the temperature between -40ºC and 85ºC,±2ºC,200 times,(around 1000 hours),record the data before and after the test,T<1.0||T=0.48|
|7||Muggle Test||IEC61215/10||Under 85ºC,±2ºC,relative humidity is 85ºC,±5ºC,around 1000 hours,record the data before and after the test,T<1.0||T=0.63|
|8||Wet-cold test||IEC61215/10||Humidity is 85,±5ºC,temperature is 85ºC,±2ºC,fall to -40ºC,cycle for 10 times.Record the data before and after the test,T<1.0||T=0.80|
|9||Outdoor exposure||IEC61215/10||Test with the moniter in outdoor temperature,total radiation need to be 60kmh·m-2 .Record the data before and after the test,T<1.0||T=0.59|
|10||Mechanical Loading||IEC61215/10||Adding the load to 2400Pa and make it distributed.Keep 2-3 times;the layer wasn't broken and no serious defects in appearance||Qualified|
1. Interlay paper between two sheets.
2. Seaworthy wooden crates.
3. Iron/Plastic belt for consolidation.
1.Reply your inquiry in 24 working hours.
2.Customized design is avaliable ,OEM is welcome .
3.Delivery the goods to our customer all over the world with speed and precision.
4.Offer customer the products with good quality and competitive price.
- 0086 519 83022998
- No.11 Chuangxin Street .Trinapv Industrypark. New North Zone. Changzhou city,Jiangsu.China